Skip to content
RankNivo — Higher Rankings. Real Growth.

Contractor Website Mistakes: What We Found on 1,770 Contractor Homepages

We checked 1,770 HVAC, plumbing and electrical homepages in Florida and Texas. Half had two or more fixable issues. Here is the data and what it means.

Contractor website mistakes are more common than most owners think. In October 2026 we checked the homepages of 1,770 HVAC, plumbing and electrical companies in Florida and Texas. Half of them had at least two problems that make it harder for Google, and for customers, to understand the business.

This report shares what we found, how we measured it, and what each problem means for a home-service business. Every number below comes from our own audit data. Where Google has published guidance on a check, we link to it. Where a threshold is our own choice, we say so.

Key findings: 50% of the 1,770 contractor homepages we checked had two or more fixable issues, or one serious one. Only 23% had none of the issues we test for. The most common gap was missing LocalBusiness structured data (40% of sites). Electrical contractors had the most issues: 58% met our “needs work” bar, against 49% for HVAC and 46% for plumbing.

How we checked 1,770 contractor websites

Our system finds home-service businesses and checks their homepage automatically. For this report we used every homepage audit it completed between 10 and 14 October 2026:

  • 900 HVAC companies in Florida
  • 485 plumbing companies in Texas, plus 7 in northwest Arkansas
  • 378 electrical contractors in Texas

We read the raw HTML of each homepage, the code Google receives before any scripts run. We removed duplicates and 58 pages whose content only appears after JavaScript loads, because a raw-HTML check can’t judge those fairly. About 159 other websites blocked our checker, so they aren’t included.

Two limits to keep in mind. First, we only checked homepages, not whole websites. Second, these are businesses our system found in Florida and Texas, not a random sample of every US contractor. The results are a useful picture, not a census.

Contractor website mistakes: the 6 most common

Chart of contractor website mistakes found on 1,770 contractor homepages

1. No LocalBusiness structured data (40% of sites)

Structured data is a block of code that states your business details, such as name, address, phone number and opening hours, in a format search engines read directly. Google’s documentation says that when people search for businesses, results “may display a prominent Google knowledge panel” with business details, and it explains how LocalBusiness markup provides that information. It recommends using the most specific type available, such as Plumber or HVACBusiness.

Structured data doesn’t guarantee a ranking or a rich result. But for a local business it’s a cheap, low-risk way to state the basics clearly. It was the single most common gap we found, and for electricians it was 43%.

2. Images without descriptive alt text (33% of sites)

Alt text is a short description of an image. Google’s image guidelines call it “the most important attribute” for image metadata, and say Google uses it, along with the page content, “to understand the subject matter of the image”. It also helps people who use screen readers.

We flagged a homepage only when it had five or more images and at least 30% of them had no alt text. Our check also counts empty alt text, which is valid for purely decorative images, so this figure may be slightly high. Even so, a third of contractor homepages leave many of their photos undescribed, including photos of real jobs, vans and team members that could help.

3. Main heading missing or competing (26% of sites)

We flagged homepages with no main (H1) heading at all, and homepages with two or more H1 headings that say different things. Duplicate headings with the same text were not counted.

To be fair, Google says there’s “no magical, ideal amount of headings” and that using them out of order doesn’t matter for Search. So this isn’t a penalty. In our view, though, a homepage should still have one clear headline that says what you do and where, for example “Emergency Plumber in Katy, TX”. When the main heading is missing, or is a phone number, visitors and search engines both get a weaker signal.

4. Page title longer than 65 characters (25% of sites)

Your page title is usually the blue headline people see in Google results. Google says there’s no limit on title length, but the title link “is truncated in Google Search results as needed, typically to fit the device width”, and it advises avoiding “unnecessarily long or verbose text”.

We used 65 characters as our cut-off, which is our own threshold, not a Google rule. Typical examples we saw repeated the company name twice or stacked several phrases together, such as “Contact Us – Free Estimates – Schedule Service”. Long titles were most common for electricians (30%) and least common for plumbers (20%).

5. Meta description missing or very short (14% of sites)

The meta description is a short summary of the page. Google says it “will sometimes use” it for the snippet under your title, “if we think it gives users a more accurate description” than the page text. 11% of the homepages we checked had no meta description at all, and another 3% had one shorter than 35 characters.

Separately, 17% had a meta description over 170 characters. Google doesn’t set a length limit, so we treat this as a minor point: Google will simply cut it to fit.

A tap-to-call link lets a visitor on a phone call you with one tap. There’s no Google rule here; this one is about customers. In our view it’s one of the cheapest fixes on a contractor website, because many people looking for an urgent repair are searching on a phone. 16% of electrical contractor homepages we checked had no tap-to-call link anywhere on the page.

Serious problems we found on a few sites

Some issues were rare, but each one can do real damage:

  • 12 homepages were set to “noindex”. Google says that when it finds this rule, it “will drop that page entirely from Google Search results”. These businesses were telling Google not to show their homepage. This can happen when a setting such as WordPress’s “Discourage search engines” option is left switched on after a site is built.
  • 11 homepages had no mobile viewport setting, which usually means the page isn’t built to display properly on phones.
  • 10 homepages had no page title at all.

Results by trade: HVAC vs plumbing vs electrical

Issue (% of sites)HVAC (FL)Plumbing (TX)Electrical (TX)All
No LocalBusiness structured data39%39%43%40%
Images without descriptive alt text34%32%31%33%
Main heading missing or competing27%23%25%26%
Title over 65 characters25%20%30%25%
No meta description11%10%12%11%
No tap-to-call link11%10%16%12%
2+ issues, or 1 serious issue49%46%58%50%
No issues found23%24%20%23%
Homepages checked9004923781,770

The plumbing column includes 7 plumbing companies from northwest Arkansas. On average, a homepage had 1.7 of the issues we test for. 403 sites had none, 478 had one, 419 had two, and 467 had three or more. (Three early audits used an older version of our checker and are counted in the totals but not in this breakdown.)

What these contractor website mistakes mean for you

None of these issues alone decides whether you rank. Google’s local results also depend on things like your Google Business Profile, reviews and distance from the searcher. But they’re the basics, and they’re usually quick and cheap to fix. In our view, a contractor competing for the same “near me” searches as 20 other companies shouldn’t give away easy points.

If your business isn’t showing up on the map at all, start with our guide on why a business doesn’t appear on Google Maps, and check that your Google Business Profile categories are right.

A 10-minute check you can do yourself

  1. Search Google for your company name and read your title and description. Are they cut off, missing, or vague?
  2. Open your homepage on your phone. Can you tap your phone number to call?
  3. Paste your homepage address into Google’s free Rich Results Test and see if any LocalBusiness data is found.
  4. Ask whoever manages your site whether the homepage has one clear main heading and alt text on your photos.
  5. In Google Search Console, inspect your homepage to confirm it can be indexed.

For a fuller check that also covers your Google Business Profile and reviews, use our 20-point local SEO audit checklist.

Frequently asked questions

What are the most common contractor website mistakes?

In our audit of 1,770 contractor homepages, the most common were missing LocalBusiness structured data (40%), images without descriptive alt text (33%), a missing or competing main heading (26%) and page titles over 65 characters (25%).

Do these issues stop my website from ranking?

Most of them don’t stop a site from ranking on their own. The exception is “noindex”, which tells Google to drop the page from search results. The others make your site harder for Google and customers to understand, which can cost you clicks and calls.

Is this data from all US contractors?

No. It covers 1,770 HVAC, plumbing and electrical homepages in Florida and Texas (plus 7 in Arkansas) that our system checked between 10 and 14 October 2026. Results elsewhere may be different.

Can I use these statistics?

Yes. Please credit “RankNivo, 2026 contractor homepage audit” and link to this page.

Want to know how your homepage scored?

RankNivo’s free website check runs the same kind of review on your site and tells you exactly what to fix. If you’d rather have it done for you, our one-time Fix Sprint ($349) fixes the homepage issues within 10 business days. And if you’re losing visitors after hours, see how an AI website chatbot answers them for you.

Sources

Keep reading

More practical guides

All resources →